Water (Cp = 4.18 kJ/kg.K) at 80°C enters a counter flow heat exchanger with a

Sail E0 Webinar

Question

Water (Cp = 4.18 kJ/kg.K) at 80°C enters a counter flow heat exchanger with a mass flow rate of 0.5 kg/s. Air (Cp = 1 kJ/kg.K) enters at 30°C with a mass flow rate of 2.09 kg/s. If the effectiveness of the heat exchanger is 0.8, the LMTD (in °C) is

Options:

A . 40

B . 20

C . 10

D . 5

Answer: Option C

-NA-

Was this answer helpful ?

Next Question

Submit Solution

More Questions on This Topic :

Question 1. A solid steel cube constrained on all six faces is heated so that the temperature rises uniformly by âˆ†T. If the t....thermal stress developed in the cube due to heating is

Question 2. A solid circular shaft needs to be designed to transmit a torque of 50 N.m. If the allowable shear stress of the mater....safety of 2, the minimum allowable design diameter in mm is

Question 3. A box contains 4 red balls and 6 black balls. Three balls are selected randomly from the box one after another, withou....selected set contains one red ball and two black balls is

Question 4. Water (specific heat, cp = 4.18 kJ/kgK) enters a pipe at a rate of 0.01 kg/s and a temperature of 20°C. The pipe, of d....temperature of the water leaving the pipe in °C is

Question 5. Water (specific heat, cp = 4.18 kJ/kgK) enters a pipe at a rate of 0.01 kg/s and a temperature of 20°C. The pipe, of d....the inner surface of the pipe at the outlet is

Question 6. In simple exponential smoothing forecasting, to give higher weightage to recent demand information, the smoothing cons....to recent demand information, the smoothing constant must be close to

Question 7. Customers arrive at a ticket counter at a rate of 50 per hr and tickets are issued in the order of their arrival. The ....exponentially distributed, the average waiting time in queue in min is

Question 8. A steel bar 200 mm in diameter is turned at a feed of 0.25 mm/rev with a depth of cut of 4 mm. The rotational speed of ....is 160 rpm. The material removal rate in mm3/s is

Question 9. A metric thread of pitch 2 mm and thread angle 60° is inspected for its pitch diameter using 3-wire method. The diamet....The diameter of the best size wire in mm is

Question 10. A planar closed kinematic chain is formed with rigid links PQ = 2.0 m, QR = 3.0 m, RS = 2.5 m and SP = 2.7 m with all ....to be fixed to obtain a double rocker (rockerrocker) mechanism is

Chapter 1 - GLOBAL STEEL SCENARIO & INDIAN STEEL INDUSTRY Part 1 : (13-04-2024) INDUSTRY AND COMPANY AWARENESS (ICA)

Direction Sense Test Part 1 Reasoning (Hindi)

Chapter 1 - RMHP / OHP / OB & BP Part 1 : (14-02-2024) GPOE

Cube & Cuboid Part 1 Reasoning (Hindi)

Data Interpretation (DI) Basic Concept Reasoning (Hindi)

Counting Figures Part 1 Counting Of Straight Lines Reasoning (Hindi)

Sail E0 free webinar Webinars

Real Numbers Part 7 Class 10 Maths

Real Numbers Part 1 Class 10 Maths

Polynomials Part 1 Class 10 Maths

DSP Combined 1 Free Revision Test SAIL JO E-0

GPOE / GPA Combined 1 Free Revision Test SAIL JO E-0

BSP Plant Specific Review Test SAIL JO E-0

BSL Combined 1 Free Revision Test SAIL JO E-0

GFM Combined 1 Free Revision Test SAIL JO E-0