Sail E0 Webinar

MCQs

Total Questions : 43 | Page 4 of 5 pages
Question 31. The permeability of the aquifer is ________ if the drawdown is 4m, discharge is 40litres/sec, thickness of confined aquifer is 30m and the radius of the well is 0.1m. The radius of influence is taken as 245m.
  1.    36 m/day
  2.    30 m/day
  3.    26 m/day
  4.    20 m/day
 Discuss Question
Answer: Option A. -> 36 m/day
Answer: (a).36 m/day
Question 32. The formula for the pumping out test in an unconfined aquifer is given by _________
  1.    \(k=\frac{qπ}{1.36(H^2-h^2)}log_{10}\frac{R}{r} \)
  2.    \(k=\frac{q}{1.36(H^2-h^2)}log_{10}\frac{R}{r} \)
  3.    \(k=\frac{q}{π(H^2-h^2)}log_{10}\frac{R}{r} \)
  4.    \(k=\frac{q}{1.36(H^2-h^2)} \)
 Discuss Question
Answer: Option B. -> \(k=\frac{q}{1.36(H^2-h^2)}log_{10}\frac{R}{r} \)
Answer: (b).\(k=\frac{q}{1.36(H^2-h^2)}log_{10}\frac{R}{r} \)
Question 33. The drawdown, corresponding to a steady discharge, are observed at a number of wells in _______
  1.    pumping out test
  2.    pumping in test
  3.    constant head permeability test
  4.    falling head permeability test
 Discuss Question
Answer: Option A. -> pumping out test
Answer: (a).pumping out test
Question 34. In a tube well of 20cm diameter in a soil with coefficient of permeability of 4.15*10¯⁴ m/s, drawdown is 4m and aquifer is 30m thick. If radius of influence is 245m, what is the discharge in each well?
  1.    0.033 m³/s
  2.    0.040 m³/s
  3.    0.036 m³/s
  4.    0.042 m³/s
 Discuss Question
Answer: Option C. -> 0.036 m³/s
Answer: (c).0.036 m³/s
Question 35. The pumping-in test was devised by _________
  1.    U.S. Bureau of soil and PRA
  2.    U.S. Bureau of reclamation
  3.    Indian standard of Bureau
  4.    None of the mentioned
 Discuss Question
Answer: Option B. -> U.S. Bureau of reclamation
Answer: (b).U.S. Bureau of reclamation
Question 36. Three tube wells of 20cm diameter each forming an equilateral triangle at distance 100m on side. The coefficient of permeability is 4.15*10¯⁴ m/s, drawdown is 4m and aquifer is 30m thick. If radius of influence is 245m, what is the discharge in each well?
  1.    0.033 m³/s
  2.    0.040 m³/s
  3.    0.036 m³/s
  4.    0.042 m³/s
 Discuss Question
Answer: Option C. -> 0.036 m³/s
Answer: (c).0.036 m³/s
Question 37. The type of hydraulics of flows towards open well is __________
  1.    Radial flow
  2.    Bottom flow
  3.    Adjacent flow
  4.    All of the mentioned
 Discuss Question
Answer: Option A. -> Radial flow
Answer: (a).Radial flow
Question 38. In a artesian well, when water level falls below the top of confined aquifer, then this type of well is known as ______
  1.    well in unconfined aquifer
  2.    gravity well
  3.    combined artesian gravity well
  4.    artesian well
 Discuss Question
Answer: Option C. -> combined artesian gravity well
Answer: (c).combined artesian gravity well
Question 39. The discharge of an open well can be determined by, which of the following method?
  1.    Constant head test
  2.    Falling head test
  3.    Recuperation test
  4.    None of the mentioned
 Discuss Question
Answer: Option C. -> Recuperation test
Answer: (c).Recuperation test
Question 40. Which of the following well, does not penetrate to the full depth of an aquifer?
  1.    Fully penetrating artesian gravity wall
  2.    Partially penetrating artesian wall
  3.    Partially penetrating artesian gravity wall
  4.    All of the mentioned
 Discuss Question
Answer: Option B. -> Partially penetrating artesian wall
Answer: (b).Partially penetrating artesian wall

Latest Videos

Latest Test Papers