Sail E0 Webinar

MCQs

Total Questions : 2104 | Page 3 of 211 pages
Question 21.

The ratio of active power to apparent power is known as __________ factor.



  1.    power
  2.    load
  3.    form
  4.    demand
 Discuss Question
Answer: Option A. -> power


Question 22.

If a driving point function N(s) = p(s)/q(s), then


  1.    the degree of p(s) and q(s) may differ by one only
  2.    the degree of p(s) and q(s) may differ by zero only
  3.    the degrees of p(s) and q(s) be equal
  4.    the degrees of p(s) and q(s) must not be equal
 Discuss Question
Answer: Option B. -> the degree of p(s) and q(s) may differ by zero only


Question 23.


Assertion (A): In a parallel circuit having two branches, each branch current may be more than source current.

Reason (R): Calculations in ac circuits use rules of complex algebra.



  1.    Both A and R are true and R is correct explanation of A
  2.    Both A and R are true and R is not the correct explanation of A
  3.    A is true but R is false
  4.    A is false but R is true
 Discuss Question
Answer: Option B. -> Both A and R are true and R is not the correct explanation of A


Question 24.

The minimum permissible size of aluminium cable for lighting circuit is



  1.    1.2 sq. mm
  2.    1.5 sq. mm
  3.    2.2 sq. mm
  4.    3.5 sq. mm
 Discuss Question
Answer: Option B. -> 1.5 sq. mm


Question 25.

Current density J, conductivity `sigma` and electric field E in a conductor are related as


  1.    J = σE
  2.    σ = JE
  3.    ψ = `E/σ`
  4.    J = σE2
 Discuss Question
Answer: Option A. -> J = σE


Question 26.


Consider the following statement : If a network has an impedance of (1 - j) as a specific frequency, the circuit would consist of series

  1. R and C
  2. R and L
  3. R, L and C
Which of the statement are correct?


  1.    1 and 2
  2.    1 and 3
  3.    1, 2 and 3
  4.    2 and 3
 Discuss Question
Answer: Option B. -> 1 and 3


Question 27.

The dual of quantity charge is



  1.    current
  2.    Voltage
  3.    flux
  4.    dϕ/dt
 Discuss Question
Answer: Option C. -> flux


Question 28.

For a transfer function H(s) = P(s)/Q(s), where P(s) and Q(s) are polynomials in s


  1.    the degrees of P(s) is always greater than degree of Q(s)
  2.    the degree of P(s) and Q(s) are equal
  3.    the degree of P(s) is independent of degree of Q(s)
  4.    the maximum difference in degrees of P(s) and Q(s) is 1
 Discuss Question
Answer: Option C. -> the degree of P(s) is independent of degree of Q(s)


Question 29.

The inductance of a coil can be increased by



  1.    choosing core material having high relative permeability
  2.    decreasing diameter of the former
  3.    decreasing the number of turns
  4.    increasing core length
 Discuss Question
Answer: Option A. -> choosing core material having high relative permeability


Question 30.

When analysing two port networks in cascade, it is more convenient to use


  1.    z parameters
  2.    h parameters
  3.    T parameters
  4.    y parameters
 Discuss Question
Answer: Option C. -> T parameters


Latest Videos

Latest Test Papers