Sail E0 Webinar

MCQs

Total Questions : 1709 | Page 8 of 171 pages
Question 71. Cavitation will begin when
  1.    the pressure at any location reaches an absolute pressure equal to the saturated vapour pressure of the liquid
  2.    pressure becomes more than critical pressure
  3.    flow is increased
  4.    pressure is increased
 Discuss Question
Answer: Option A. -> the pressure at any location reaches an absolute pressure equal to the saturated vapour pressure of the liquid
Question 72. Pascal-second is the unit of
  1.    pressure
  2.    kinematic viscosity
  3.    dynamic viscosity
  4.    surface tension
 Discuss Question
Answer: Option C. -> dynamic viscosity
Question 73. Which of the following is the unit of kinematic viscosity
  1.    pascal
  2.    poise
  3.    stoke
  4.    faraday
 Discuss Question
Answer: Option C. -> stoke
Question 74. The ratio of absolute viscosity to mass density is known as
  1.    specific viscosity
  2.    viscosity index
  3.    kinematic viscosity
  4.    coefficient of viscosity
 Discuss Question
Answer: Option C. -> kinematic viscosity
Question 75. Ratio of inertia force to surface Jension is known as
  1.    Mach number
  2.    Froude number
  3.    Reynold’s number
  4.    Weber’s number
 Discuss Question
Answer: Option D. -> Weber’s number
Question 76. Which of the following has highest coefficient of discharge ?
  1.    sharp edged orifice
  2.    venturimeter
  3.    Borda’s mouthpiece running full
  4.    CipoUetti weir
 Discuss Question
Answer: Option B. -> venturimeter
Question 77. A right circular cylinder open at the top is filled with liquid and rotated about its vertical axis at such a speed that half the liquid spills out, then the pressure intensity at the center of bottom is
  1.    zero
  2.    one-fourth its value when cylinder was full
  3.    one-half its value when cylinder was full
  4.    cannot be predicted from the given data
 Discuss Question
Answer: Option A. -> zero
Question 78. Stanton diagram is a
  1.    log-log plot of friction factor against Reynolds number
  2.    log-log plot of relative roughness against Reynolds number
  3.    semi-log plot of friction factor against Reynolds number
  4.    semi-log plot of friction factor against relative roughness
 Discuss Question
Answer: Option A. -> log-log plot of friction factor against Reynolds number
Question 79. A closed tank containing water is moving in a horizontal direction along a straight line at a constant speed. The tank also contains a steel ball and a bubble of air. If the tank is decelerated horizontally, theni) the ball will move to the frontii) the bubble will move to the frontiii) the ball will move to the reariv) the bubble will move to the rear Find out which of the above statements are correct ?
  1.    (i) and (ii)
  2.    (i) and (iv)
  3.    (ii) and (iii)
  4.    (iii) and (iv)
 Discuss Question
Answer: Option B. -> (i) and (iv)
Question 80. In steady flow of a fluid, the total accele ration of any fluid particle
  1.    can be zero
  2.    is never zero
  3.    is always zero
  4.    is independent of coordinates
 Discuss Question
Answer: Option A. -> can be zero

Latest Videos

Latest Test Papers