Sail E0 Webinar

Computer Aptitude

COMPUTER HARDWARE MCQs

Total Questions : 350 | Page 13 of 35 pages
Question 121. A system has two IDE hard drives that are each divided into primary and extended partitions, which drive letter is assigned to the primary partition of the second drive?
  1.    C
  2.    D
  3.    E
  4.    F
  5.    None of the above
 Discuss Question
Answer: Option B. -> D
Question 122. Your CD-ROM audio cable connects to the:
  1.    speaker
  2.    sound card (or motherboard if sound is integrated with it)
  3.    power supply
  4.    hard drive
  5.    BIOS
 Discuss Question
Answer: Option B. -> sound card (or motherboard if sound is integrated with it)
Question 123. What would you ask to determine if the display is working?
  1.    Is there a video cursor or action on the screen?
  2.    Did the computer beep or chime?
  3.    Is there high voltage static on the screen
  4.    All of the above
  5.    None of the above
 Discuss Question
Answer: Option D. -> All of the above
Question 124. After installing a sound card, the system locks up when a parallel port tape backup unit is also used. What is most likely the problem?
  1.    IRQ
  2.    DMA
  3.    defective LPT port
  4.    defective tape driver
  5.    defective sound card.
 Discuss Question
Answer: Option A. -> IRQ
Question 125. Type one PC cards:
  1.    are used only in desktops
  2.    are no longer being produced
  3.    are the thinnest of the PC cards
  4.    don't exist
  5.    have their own power source
 Discuss Question
Answer: Option C. -> are the thinnest of the PC cards
Question 126. You are testing the resistance in Ohms of a fuse on a 15K amp system. If the fuse is good, the meter should read?
  1.    0
  2.    0.2
  3.    5
  4.    2
  5.    None of the above
 Discuss Question
Answer: Option A. -> 0
Question 127. In laser technology, what happens during the transfer stage?
  1.    Residual toner is transferred to the waste receptacle
  2.    The laser transfers the image from the drum to the paper
  3.    The image is transferred from the drum to the paper
  4.    A negative charge is transferred to the surface of the drum
  5.    None of the above
 Discuss Question
Answer: Option C. -> The image is transferred from the drum to the paper
Question 128. 14.4 modem should transmit _____ bits per second
  1.    14,400-15,000
  2.    140-150
  3.    1400-1500
  4.    140,000-150,000
  5.    None of the above
 Discuss Question
Answer: Option A. -> 14,400-15,000
Question 129. _____ is the term used to refer to the process of two modems establishing communications with each other.
  1.    interacting
  2.    handshaking
  3.    connecting
  4.    linking
  5.    pinging
 Discuss Question
Answer: Option B. -> handshaking
Question 130. Resistance is measured in ohm.
  1.    True
  2.    FALSE
  3.    Turn the printer on and off
  4.    Replace the ribbon
  5.    None of the above
 Discuss Question
Answer: Option A. -> True

Latest Videos
Chapter 1 - GLOBAL STEEL SCENARIO & INDIAN STEEL INDUSTRY Part 1 : (13-04-2024) INDUSTRY AND COMPANY AWARENESS (ICA)
Direction Sense Test Part 1 Reasoning (Hindi)
Chapter 1 - RMHP / OHP / OB & BP Part 1 : (14-02-2024) GPOE
Cube & Cuboid Part 1 Reasoning (Hindi)
Data Interpretation (DI) Basic Concept Reasoning (Hindi)
Counting Figures Part 1 Counting Of Straight Lines Reasoning (Hindi)
Sail E0 free webinar Webinars
Real Numbers Part 7 Class 10 Maths
Real Numbers Part 1 Class 10 Maths
Polynomials Part 1 Class 10 Maths

Latest Test Papers

DSP Combined 1 Free Revision Test SAIL JO E-0
GPOE / GPA Combined 1 Free Revision Test SAIL JO E-0
BSP Plant Specific Review Test SAIL JO E-0
BSL Combined 1 Free Revision Test SAIL JO E-0
GFM Combined 1 Free Revision Test SAIL JO E-0