Sail E0 Webinar

MCQs

Total Questions : 2307 | Page 228 of 231 pages
Question 2271. The dimensions of rate constant for reaction 3A → B are (l/gm mole)/min. Therefore the reaction order is______________________?
  1.    0
  2.    1
  3.    2
  4.    3
 Discuss Question
Answer: Option C. -> 2
NO EXPLANATION IS AVAILABLE FOR THIS QUESTION!
Question 2272. A catalyst loses its activity due to__________________?
  1.    Loss in surface area of the active component
  2.    Agglomeration of metal particles caused by thermal sintering of the solid surface
  3.    Covering of the catalytic active sites by a foreign substance
  4.    All A., B. and C.
 Discuss Question
Answer: Option D. -> All A., B. and C.
NO EXPLANATION IS AVAILABLE FOR THIS QUESTION!
Question 2273. Transition state theory relates the above quantities as___________________?
  1.    k ∝ e-E/RT
  2.    k ∝ T.eE/RT
  3.    k ∝ √T
  4.    k ∝ T1.5
 Discuss Question
Answer: Option B. -> k ∝ T.eE/RT
NO EXPLANATION IS AVAILABLE FOR THIS QUESTION!
Question 2274. Second order consecutive irreversible reaction as shown in the bellow figure, were carried out in a constant volume isothermal batch reactor with different initial feed compositions. Reactor temperature was same in all the cases. In experiments where the ratio of concentration of B to that of A in the initial feed was less than 0.5, the concentration of B increased first, reached a maximum and then declined with time. However, for all experiments where this concentration ratio was 0.5 or above, concentration of B decreased monotonically with time right from the beginning. What is the ratio of the two rate constants (k1/k2) ?
  1.    1/4
  2.    1/2
  3.    2
  4.    4
 Discuss Question
Answer: Option A. -> 1/4
NO EXPLANATION IS AVAILABLE FOR THIS QUESTION!
Question 2275. In a semi-batch reactor __________________?
  1.    Mixing takes place in axial direction only
  2.    Velocity of reaction can be controlled
  3.    Condition similar to plug flow reactor exists
  4.    Residence time is constant
 Discuss Question
Answer: Option B. -> Velocity of reaction can be controlled
NO EXPLANATION IS AVAILABLE FOR THIS QUESTION!
Question 2276. ‘If the catalyst pore size is small in comparison with the mean free path, collisions with the pore wall controls the process’. The diffusivity under this condition is called ‘Knudsen diffusivity’, which is affected by the_____________________?
  1.    Pressure
  2.    Temperature
  3.    Both A. & B.
  4.    Neither A. nor B.
 Discuss Question
Answer: Option B. -> Temperature
NO EXPLANATION IS AVAILABLE FOR THIS QUESTION!
Question 2277. Pure ethanol vapor is fed to a reactor packed with alumina catalyst, at the rate of 100 kmole / hr. The reactor products comprise: ethylene: 95 kmole / hr, water vapour: 97.5 k mole / hr and diethyl ether: 2.5 kmole/hr. The reactions occuring can be represented by: C2H5OH → C2H4 + H2O 2C2H5OH → C2H5 – O – C2H5 + H2O The percent conversion of ethanol in the reactor is________________?
  1.    100
  2.    97.5
  3.    95
  4.    2.5
 Discuss Question
Answer: Option A. -> 100
NO EXPLANATION IS AVAILABLE FOR THIS QUESTION!
Question 2278. A batch adiabatic reactor at an initial temperature of 373°K is being used for the reaction, A → B. Assume the heat of reaction is – 1kJ/mole at 373°K and heat capacity of both A and B to be constant and equal to 50J/mole.K. The temperature rise after a conversion of 0.5 will be ____________?
  1.    5°C
  2.    10°C
  3.    20°C
  4.    100°C
 Discuss Question
Answer: Option B. -> 10°C
NO EXPLANATION IS AVAILABLE FOR THIS QUESTION!
Question 2279. The most unsuitable reactor for carrying out reactions in which high reactant concentration favours high yields is________________________?
  1.    Backmix reactor
  2.    Plug flow reactor
  3.    Series of CSTR
  4.    PFR in series
 Discuss Question
Answer: Option A. -> Backmix reactor
NO EXPLANATION IS AVAILABLE FOR THIS QUESTION!
Question 2280. A spherical porous catalyst particle of radius R is subjected to reactant A which reacts to form B by a zero order surface reaction A → B. Film mass transfer resistance is negligible and pore diffusion of A is rate controlling. The effectiveness factor of the catalyst is reported as 7/8. Which of the following statement is true?
  1.    Inner catalyst core of radius R/8 does not participate in reaction
  2.    Inner catalyst core of radius R/2 does not participate in reaction
  3.    Inner catalyst core of radius 7R/8 does not participate in reaction
  4.    Effectiveness factor for a zero order reaction cannot be 7/8 as it must always be 1
 Discuss Question
Answer: Option A. -> Inner catalyst core of radius R/8 does not participate in reaction
NO EXPLANATION IS AVAILABLE FOR THIS QUESTION!

Latest Videos

Latest Test Papers