Sail E0 Webinar

MCQs

Total Questions : 2015 | Page 198 of 202 pages
Question 1971. If the horizontal distance between the staff point and the point of observation is d, then the error due to curvature of earth is proportional to_______________?
  1.    d
  2.    1/d
  3.    d2
  4.    1/d2
 Discuss Question
Answer: Option C. -> d2
NO EXPLANATION IS AVAILABLE FOR THIS QUESTION!
Question 1972. The difference between a level line and a horizontal line is that_______________?
  1.    level line is a curved line while hori-zontal line is a straight line
  2.    level line is normal to plumb line while horizontal line may not be normal to plumb line at the tangent point to level line
  3.    horizontal line is normal to plumb line while level line may not be normal to the plumb line
  4.    both are same
 Discuss Question
Answer: Option A. -> level line is a curved line while hori-zontal line is a straight line
NO EXPLANATION IS AVAILABLE FOR THIS QUESTION!
Question 1973. With the rise of temperature, the sensitivity of a bubble tube______________?
  1.    decreases
  2.    increases
  3.    remains unaffected
  4.    none of the above
 Discuss Question
Answer: Option A. -> decreases
NO EXPLANATION IS AVAILABLE FOR THIS QUESTION!
Question 1974. The suitable contour interval for a map with scale 1 : 10000 is______________?
  1.    2 m
  2.    5m
  3.    10 m
  4.    20 m
 Discuss Question
Answer: Option A. -> 2 m
NO EXPLANATION IS AVAILABLE FOR THIS QUESTION!
Question 1975. Contour interval is_______________?
  1.    inversely proportional to the scale of the map
  2.    directly proportional to the flatness of ground
  3.    larger for accurate works
  4.    larger if the time available is more
 Discuss Question
Answer: Option A. -> inversely proportional to the scale of the map
NO EXPLANATION IS AVAILABLE FOR THIS QUESTION!
Question 1976. Dumpy level is most suitable when______________?
  1.    the instrument is to be shifted frequently
  2.    fly levelling is being done over long distance
  3.    many readings are to be taken from a single setting of the instrument
  4.    all of the above
 Discuss Question
Answer: Option C. -> many readings are to be taken from a single setting of the instrument
NO EXPLANATION IS AVAILABLE FOR THIS QUESTION!
Question 1977. Sensitiveness of a level tube is designated by______________?
  1.    radius of level tube
  2.    length of level tube
  3.    length of bubble of level tube
  4.    none of the above
 Discuss Question
Answer: Option A. -> radius of level tube
NO EXPLANATION IS AVAILABLE FOR THIS QUESTION!
Question 1978. Select the correct statement_______________?
  1.    A contour is not necessarily a closed curve
  2.    A contour represents a ridge line if the concave side of lower value con¬tour lies towards the higher value contour
  3.    Two contours of different elevations do not cross each other except in case of an overhanging cliff
  4.    All of the above statements are correct
 Discuss Question
Answer: Option C. -> Two contours of different elevations do not cross each other except in case of an overhanging cliff
NO EXPLANATION IS AVAILABLE FOR THIS QUESTION!
Question 1979. An imaginary line lying throughout the surface of ground and preserving a constant inclination to the horizontal is known as__________________?
  1.    contour line
  2.    horizontal equivalent
  3.    contour interval
  4.    contour gradient
 Discuss Question
Answer: Option D. -> contour gradient
NO EXPLANATION IS AVAILABLE FOR THIS QUESTION!
Question 1980. The difference of levels between two stations A and B is to be determined. For best results, the instrument station should be_______________?
  1.    equidistant from A and B
  2.    closer to the higher station
  3.    closer to the lower station
  4.    as far as possible from the line AB
 Discuss Question
Answer: Option A. -> equidistant from A and B
NO EXPLANATION IS AVAILABLE FOR THIS QUESTION!

Latest Videos

Latest Test Papers