Shear stress develops on a fluid element, if :

The span to depth ratio limit is specified in IS : 456-1978 for the reinforced concrete beams, in order to ensure that the

Is 459-1978 recommends to provide certain minimum steel in a RCC beam

Some of the
structural strength of a clayey material that is lost by remoulding is
slowly recovered with time. This property of soils to undergo an
isothermal gel-to-soil-to-gel transformation upon agitation and
subsequent rest is termed :

The
capacities of "One-way 1.5 m wide sidewalk (persons per hour)" and
"One-way 2-lane urban road (PCU per hour, with no frontage access, no
standing vehicles and very little cross traffic)" are respectively.

In a steady radial flow into an intake, the velocity is found to vary as (1/r²), where r is the radial distance. The acceleration of the flow is proportional to

The treatment that should be given to the water from a deep tube well is :

On sag (or valley) curves the available sight distance is determined based on :

The number of simultaneous equations to be solved in the slope deflection method, is equal to :

Maximum size of a fillet weld for a plate of square edge is