Sail E0 Webinar

MCQs

Total Questions : 440 | Page 7 of 44 pages
Question 61.


Ryve's formula for flood estimate in cumecs, is



  1.    Q = CA3/4
  2.    Q = CA2/3
  3.    Q = CA1/2
  4.    Q = CA.1/4
 Discuss Question
Answer: Option B. -> Q = CA2/3


Question 62.

In estimating
the rate of evaporation from the reservoir surface, a pan 1.5 metres in
diameter, was filled upto 8.0 cm. During a specified period of time, the
rainfall recorded was 5 cm. 3 cm of water was removed from the pan to
keep the depth of water. At the end of the time, the depth was 9 cm. If
the pan coefficient is 0.6, the evaporation loss is




  1.    2 mm
  2.    4 mm
  3.    6 mm
  4.    8 mm
 Discuss Question
Answer: Option C. -> 6 mm


Question 63.

Dicken's formula for high flood estimate, is useful only for the catchments in



  1.    Southern India
  2.    Northern India
  3.    Eastern India
  4.    Western India.
 Discuss Question
Answer: Option B. -> Northern India


Question 64.


If the loss due to friction in pipes is 4 m, the total losses in strainer and bends may be taken as



  1.    0.10 m
  2.    0.20 m
  3.    0.5 m
  4.    1.0 m.
 Discuss Question
Answer: Option D. -> 1.0 m.


Question 65.

The rate of evaporation from reservoirs may be determined by


  1.    pan-measurement method
  2.    empirical formulae
  3.    storage equation method
  4.    energy budget method
  5.    all the above.
 Discuss Question
Answer: Option E. -> all the above.


Question 66.


If h is the loss due to friction in a pipe. Total losses in strainer and bends may be taken as



  1.    0.01 h
  2.    0.45 h
  3.    0.20 h
  4.    0.25 h
  5.    0.3 h.
 Discuss Question
Answer: Option D. -> 0.25 h


Question 67.


When a constant
discharge 2.91 litres/sec. was obtained in a pumping test, the draw
downs in the test wells at 3 m and 6.184 m were 2.6 m and 0.3 m
respectively. If over-all depth of the pumping well was 16 m, the
permeability of the soil, is



  1.    0.0005 cm/sec
  2.    0.001 cm/sec
  3.    0.002 cm/sec
  4.    0.01 cm/sec.
 Discuss Question
Answer: Option B. -> 0.001 cm/sec


Question 68.

Pick up the correct statement from the following :




  1.    The ratio of total volume of voids in soil aggregates to the total volume of aggregate, is called Porosity
  2.    Water retained by the interstices due to molecular attraction, is called pellicular water
  3.    The ratio of volume of water obtained by gravity drainage to the total volume of the materials drained, is called 'yield'
  4.    Sum of the percentage of specific yield and specific retention is 100
  5.    All the above.
 Discuss Question
Answer: Option E. -> All the above.


Question 69.

Isopiastic lines are the contours



  1.    drawn to represent water table
  2.    drawn to represent piezometric heads
  3.    drawn to piezometric surface
  4.    none of these.
 Discuss Question
Answer: Option C. -> drawn to piezometric surface


Question 70.

The radius of influence is



  1.    radius of the main well
  2.    distance from the wall of main well to the point of zero draw down
  3.    distance from the centre of main well to the point of zero draw down
  4.    none of these.
 Discuss Question
Answer: Option C. -> distance from the centre of main well to the point of zero draw down


Latest Videos

Latest Test Papers