Sail E0 Webinar

MCQs

Total Questions : 320 | Page 1 of 32 pages
Question 1. Anti rolling effect allows good relaxation of fibers, making it easier for teeth to
  1.    pick the material
  2.    release the material
  3.    detach the material
  4.    rotate the material
 Discuss Question
Answer: Option B. -> release the material
Answer: (b).release the material
Question 2. First two pairs of intersecting rotating head drawframe have
  1.    large diameters
  2.    identical diameters
  3.    large and identical diameters
  4.    small and identical diameters
 Discuss Question
Answer: Option C. -> large and identical diameters
Answer: (c).large and identical diameters
Question 3. When drawframes are equipped with herrison's cylinder, barrel cylinder and elastic nip, control of fibers is
  1.    delicate
  2.    delicate but powerful
  3.    weak
  4.    constant
 Discuss Question
Answer: Option B. -> delicate but powerful
Answer: (b).delicate but powerful
Question 4. When material passes through feeler to drawing, mechanical memory rotates by
  1.    two-fourths of a turn
  2.    three-fourths of a turn
  3.    4 times of a turn
  4.    2 times of a turn
 Discuss Question
Answer: Option B. -> three-fourths of a turn
Answer: (b).three-fourths of a turn
Question 5. Number of clothings available for Herrison's cylinder is
  1.    4
  2.    3
  3.    2
  4.    1
 Discuss Question
Answer: Option C. -> 2
Answer: (c).2
Question 6. Teeth on rollers in intersecting rotating disks are inclined in direction
  1.    opposite to rotation
  2.    same as rotation
  3.    perpendicular to rotation
  4.    changing accordingly
 Discuss Question
Answer: Option A. -> opposite to rotation
Answer: (a).opposite to rotation
Question 7. Barrel cylinders with elastic nip have a rubber section which is
  1.    thicker from middle
  2.    thinner from middle
  3.    thicker from center
  4.    thinner from center
 Discuss Question
Answer: Option B. -> thinner from middle
Answer: (b).thinner from middle
Question 8. Mechanical memory in mechanical draft autoleveller is a
  1.    roller
  2.    rod
  3.    disk
  4.    plate
 Discuss Question
Answer: Option C. -> disk
Answer: (c).disk
Question 9. Higher speed of teeth tips of controller than base speed allows speed of control device to be
  1.    constant
  2.    variable
  3.    slow
  4.    high
 Discuss Question
Answer: Option B. -> variable
Answer: (b).variable
Question 10. Heads per machines in Herrison-small barrel cylinders are
  1.    4
  2.    6
  3.    3
  4.    2
 Discuss Question
Answer: Option A. -> 4
Answer: (a).4

Latest Videos
Chapter 1 - GLOBAL STEEL SCENARIO & INDIAN STEEL INDUSTRY Part 1 : (13-04-2024) INDUSTRY AND COMPANY AWARENESS (ICA)
Direction Sense Test Part 1 Reasoning (Hindi)
Chapter 1 - RMHP / OHP / OB & BP Part 1 : (14-02-2024) GPOE
Cube & Cuboid Part 1 Reasoning (Hindi)
Data Interpretation (DI) Basic Concept Reasoning (Hindi)
Counting Figures Part 1 Counting Of Straight Lines Reasoning (Hindi)
Sail E0 free webinar Webinars
Real Numbers Part 7 Class 10 Maths
Real Numbers Part 1 Class 10 Maths
Polynomials Part 1 Class 10 Maths

Latest Test Papers

Pie Chart - Test Paper 1 Data Interpretation Reasoning & DI
Tabulation - Test Paper 2 Data Interpretation Reasoning & DI
Test Paper 1 Direction Sense Test Reasoning & DI
ICA , RDIC,GFM Free Modal Test Paper - Non - Technical Branch Old Syllabus 2022 - SAIL Junior Officer E0
GFM Combined 1 Free Revision Test SAIL JO E-0