Sail E0 Webinar

MCQs

Total Questions : 126 | Page 3 of 13 pages
Question 21. A machine that does not improve the mass evenness is
  1.    Drawframe
  2.    Ring doubler
  3.    Speedframe
  4.    Ribbon lap
 Discuss Question
Answer: Option C. -> Speedframe


-NA-


Question 22. Fibre individualization in a card will increase by increasing
  1.    Licker-in to cylinder setting
  2.    Doffer speed
  3.    Licker-in speed
  4.    Cylinder speed
 Discuss Question
Answer: Option D. -> Cylinder speed


-NA-


Question 23. Compared to the spinning of finer cotton yarns, the preferred rotor diameter for the production of
very coarse cotton yarns would
  1.    Be higher
  2.    Be lower
  3.    Remain the same
  4.    Change depending on fibre strength
 Discuss Question
Answer: Option A. -> Be higher


-NA-


Question 24. The nonwoven process which has the highest production rate is
  1.    Needle punching
  2.    Hydroentangling
  3.    Melt blowing
  4.    Spunbonding
 Discuss Question
Answer: Option D. -> Spunbonding


-NA-


Question 25. Crease resist finishing of cotton fabric does not lead to
  1.    Reduction in tensile strength
  2.    Increase in dimensional stability
  3.    Increase in moisture regain
  4.    Increase in bending length
 Discuss Question
Answer: Option C. -> Increase in moisture regain


-NA-


Question 26. Disperse dye cannot generally be fixed on polyester by
  1.    Superheated steam at180oC
  2.    Saturated steam at130oC
  3.    Dry heat at 200oC
  4.    Saturated steam at 100oC
 Discuss Question
Answer: Option D. -> Saturated steam at 100oC


-NA-


Question 27. During bleaching of cotton with H2O2, the stabilizer used is
  1.    Sodium hydroxide
  2.    Sodium silicate
  3.    Acetic acid
  4.    Sodium carbonate
 Discuss Question
Answer: Option B. -> Sodium silicate


-NA-


Question 28. The highest washing fastness in a dyed cotton fabric would be obtained if the dye-fibre bond is
  1.    Ionic
  2.    Hydrogen
  3.    Covalent
  4.    Van der Waal's force
 Discuss Question
Answer: Option C. -> Covalent


-NA-


Question 29. Out of 100 textile companies, 10 companies are involved in spinning, weaving and chemical
processing, 25 companies are involved in spinning and chemical processing, and 30 companies are
involved in weaving and chemical processing. If 65 companies are involved in chemical
processing, the number of companies involved ONLY in chemical processing is_______.
  1.    5
  2.    10
  3.    15
  4.    20
 Discuss Question
Answer: Option D. -> 20


-NA-


Question 30. In a card the probability of fibre transfer from cylinder to doffer in one revolution of cylinder is
0.2. The probability that a particular fibre will be transferred to the doffer within the first three
revolutions of cylinder is _______.
  1.    0.45 to 0.46
  2.    0.78 to 0.79
  3.    0.48 to 0.49
  4.    1.21 to 1.22
 Discuss Question
Answer: Option C. -> 0.48 to 0.49


-NA-


Latest Videos

Latest Test Papers