Sail E0 Webinar

MCQs

Total Questions : 292 | Page 2 of 30 pages
Question 11. A simply supported beam shall be deemed to be a deep beam if the ratio of its effective span to overall depth, is
  1.    2.0
  2.    2.5
  3.    less than 2
  4.    less than 2.5
 Discuss Question
Answer: Option A. -> 2.0
Answer: (a).2.0
Question 12. All reinforcement should be free from
  1.    loose mill scales
  2.    loose rust
  3.    paints
  4.    all the above.
 Discuss Question
Answer: Option D. -> all the above.
Answer: (d).all the above.
Question 13. For concreting of heavily reinforced sections without vibration, the workability of concrete should be
  1.    very low
  2.    low
  3.    medium
  4.    high.
 Discuss Question
Answer: Option D. -> high.
Answer: (d).high.
Question 14. The permissible bending stresses Pbet for steel slab bases should not exceed
  1.    1500 kg/cm²
  2.    1650 kg/cm²
  3.    1800 kg/cm²
  4.    1890 kg/cm²
 Discuss Question
Answer: Option A. -> 1500 kg/cm²
Answer: (a).1500 kg/cm²
Question 15. Pick up the correct statement from the following:
  1.    The diameter of a rivet, before driving is taken as the nominal diameter of the rivet
  2.    The diameter of the rivet hole is taken as the gross area of the rivet
  3.    For rivets of nominal diameters less than 25 mm, the diameter of the rivet hole is taken as the nominal diameter of the rivet plus 1.5 mm
  4.    All the above.
 Discuss Question
Answer: Option D. -> All the above.
Answer: (d).All the above.
Question 16. The distance of the critical section for shear from the periphery of the column or drop panal is at a distance (where d is effective depth of flat slab).
  1.    d
  2.    d/2
  3.    d/3
  4.    d/5
 Discuss Question
Answer: Option D. -> d/5
Answer: (d).d/5
Question 17. If fck is characteristic compressive strength of concrete, the flexural and split tensile strength fcr = a√fck N/mm² where the value of a is
  1.    0.4
  2.    0.5
  3.    0.6
  4.    0.7
 Discuss Question
Answer: Option D. -> 0.7
Answer: (d).0.7
Question 18. Pick up the correct statement from the following:
  1.    Net sectional area of a tension member is its gross area less deductions for holes
  2.    Gross diameter of river hole is 1.5 mm in excess of its normal diameter if it is greater than 25 mm
  3.    Gross diameter of the rivet hole is 2.0 mm in excess of its normal diameter if it is greater than 25 mm
  4.    All the above.
 Discuss Question
Answer: Option D. -> All the above.
Answer: (d).All the above.
Question 19. The value of the constant K in the formula As = K.bd/fs for determining the minimum area of tension reinforcement in a beam is
  1.    0.95
  2.    0.90
  3.    0.85
  4.    0.80
 Discuss Question
Answer: Option C. -> 0.85
Answer: (c).0.85
Question 20. The concrete may be accepted if the average equivalent cube strength of the cores, is at least 85% of the cube strength of the concrete grade at the specified age and no individual core possesses strength less than
  1.    90%
  2.    85%
  3.    80%
  4.    75%
 Discuss Question
Answer: Option D. -> 75%
Answer: (d).75%

Latest Videos
Chapter 1 - GLOBAL STEEL SCENARIO & INDIAN STEEL INDUSTRY Part 1 : (13-04-2024) INDUSTRY AND COMPANY AWARENESS (ICA)
Direction Sense Test Part 1 Reasoning (Hindi)
Chapter 1 - RMHP / OHP / OB & BP Part 1 : (14-02-2024) GPOE
Cube & Cuboid Part 1 Reasoning (Hindi)
Data Interpretation (DI) Basic Concept Reasoning (Hindi)
Counting Figures Part 1 Counting Of Straight Lines Reasoning (Hindi)
Sail E0 free webinar Webinars
Real Numbers Part 7 Class 10 Maths
Real Numbers Part 1 Class 10 Maths
Polynomials Part 1 Class 10 Maths

Latest Test Papers

GPOE / GPA Combined 1 Free Mock Test SAIL JO E-0 2024
Chapter 3.1 : INTRODUCTION Chapter 3 : Sinter Plant SAIL E0 - GPOE/GPA 2024
Chapter 2.3 : COAL HANDLING PLANT - Set 1 Chapter 2 : Coke Ovens and Coal Chemicals SAIL E0 - GPOE/GPA 2024
Chapter 1.1 : INTRODUCTION Chapter 1 : Raw Material Handling Plant SAIL E0 - GPOE/GPA 2024
DSP Combined 1 Free Revision Test SAIL JO E-0