Sail E0 Webinar

MCQs

Total Questions : 147 | Page 2 of 15 pages
Question 11. The frequency of precession, the transition frequency and the Larmor frequency are
  1.    different terms for the same frequency
  2.    same terms for the same frequency
  3.    different terms for the different frequency
  4.    same terms for the different frequency
 Discuss Question
Answer: Option A. -> different terms for the same frequency
Answer: (a).different terms for the same frequency
Question 12. In scanning electron microscopy
  1.    a specimen is fixed and then coated with thin layer of a heavy metal
  2.    a specimen is fixed and then coated with transition metal
  3.    a specimen is not fixed and then coated with thin layer of a heavy metal
  4.    none of the above
 Discuss Question
Answer: Option A. -> a specimen is fixed and then coated with thin layer of a heavy metal
Answer: (a).a specimen is fixed and then coated with thin layer of a heavy metal
Question 13. How do you turn a signal recorded in the time domain into a frequency domain signal?
  1.    Fourier transformation
  2.    Measurement of peak areas
  3.    By use of a Michelson interferometer
  4.    None of the above
 Discuss Question
Answer: Option A. -> Fourier transformation
Answer: (a).Fourier transformation
Question 14. In immunofluroscence microscopy, fluroscent compounds are attached to
  1.    an antibody specific for the subcellular structure
  2.    an antigen specific for the subcellular structure
  3.    bound antibody specific for the subcellular structure
  4.    none of these
 Discuss Question
Answer: Option A. -> an antibody specific for the subcellular structure
Answer: (a).an antibody specific for the subcellular structure
Question 15. How many possible orientations do spin 1/2 nuclei have when they are located in an applied magnetic field?
  1.    2
  2.    4
  3.    3
  4.    6
 Discuss Question
Answer: Option A. -> 2
Answer: (a).2
Question 16. What does the selectivity factor describe?
  1.    The proportional difference in widths of two chromatographic peaks
  2.    The maximum number of different species which a column can separate simultaneously
  3.    The relative separation achieved between two species
  4.    None of the above
 Discuss Question
Answer: Option C. -> The relative separation achieved between two species
Answer: (c).The relative separation achieved between two species
Question 17. The column is heated to
  1.    prevent analyte condensation within the column
  2.    control elution of the different analytes
  3.    reduce band broadening to get sharper peaks
  4.    all of these
 Discuss Question
Answer: Option D. -> all of these
Answer: (d).all of these
Question 18. What are the benefits of decreasing the column internal diameter?
  1.    Increased sample capacity
  2.    Increased resolution
  3.    Reduced risk of column overloading
  4.    All of the above
 Discuss Question
Answer: Option B. -> Increased resolution
Answer: (b).Increased resolution
Question 19. A retention gap is placed between the injector and the front of the column to
  1.    retain contaminants and prevent them from reaching the column
  2.    retain the sample and release it gradually to the column
  3.    prevent backflush of the injected solution
  4.    all of the above
 Discuss Question
Answer: Option A. -> retain contaminants and prevent them from reaching the column
Answer: (a).retain contaminants and prevent them from reaching the column
Question 20. Helium is generally preferred as carrier gas over nitrogen and hydrogen because
  1.    it is inert
  2.    it has a lower viscosity
  3.    it doubles up as a party gas for balloons and funny voices
  4.    all of above
 Discuss Question
Answer: Option D. -> all of above
Answer: (d).all of above

Latest Videos

Latest Test Papers