Sail E0 Webinar

Computer Aptitude > Networking

NETWORKING MISCELLANEOUS MCQs

Total Questions : 411 | Page 41 of 42 pages
Question 401. Satellite-Switched Time-Division Multiple Access (SS/TDMA) is
  1.    the method of determining which device has access to the transmission medium at any time.
  2.    a medium access control technique for multiple access transmission media
  3.    a form of TDMA in which circuit switching is used to dynamically change the channel assignments
  4.    All of the above
  5.    None of the above
 Discuss Question
Answer: Option C. -> a form of TDMA in which circuit switching is used to dynamically change the channel assignments
Question 402. When you ping the loopback address, a packet is sent where?
  1.    On the network
  2.    Down through the layers of the IP architecture and then up the layers again
  3.    Across the wire
  4.    through the loopback dongle
  5.    None of the above
 Discuss Question
Answer: Option B. -> Down through the layers of the IP architecture and then up the layers again
Question 403. Which of the following TCP/IP protocol is used for transferring electronic mail messages from one machine to another?
  1.    FTP
  2.    SNMP
  3.    SMTP
  4.    RPC
  5.    None of the above
 Discuss Question
Answer: Option C. -> SMTP
Question 404. A distributed network configuration in which all data/information pass through a central computer is
  1.    bus network
  2.    star network
  3.    ring network
  4.    Point-to-point network
  5.    None of the above
 Discuss Question
Answer: Option B. -> star network
Question 405. Which of the following device is used to connect two systems, especially if the systems use different protocols?
  1.    hub
  2.    bridge
  3.    gateway
  4.    repeater
  5.    None of the above
 Discuss Question
Answer: Option C. -> gateway
Question 406. The synchronous modems are more costly than the asynchronous modems because
  1.    they produce large volume of data
  2.    they contain clock recovery circuits
  3.    they transmit the data with stop and start bits.
  4.    they operate with a larger bandwidth
  5.    None of the above
 Discuss Question
Answer: Option B. -> they contain clock recovery circuits
Question 407. Which of the following TCP/IP protocol allows an application program on one machine to send a datagram to an application program on another machine?
  1.    UDP
  2.    VMTP
  3.    X.25
  4.    SMTP
  5.    None of the above
 Discuss Question
Answer: Option A. -> UDP
Question 408. A remote batch-processing operation in which data is solely input to a central computer would require a:
  1.    telegraph line
  2.    simplex lines
  3.    mixedband channel
  4.    All the above
  5.    None of the above
 Discuss Question
Answer: Option B. -> simplex lines
Question 409. ICMP (Internet Control Message Protocol) is
  1.    a TCP/IP protocol used to dynamically bind a high level IP Address to a low-level physical hardware address
  2.    a TCP/IP high level protocol for transferring files from one machine to another
  3.    a protocol used to monitor computers
  4.    a protocol that handles error and control messages
  5.    None of the above
 Discuss Question
Answer: Option D. -> a protocol that handles error and control messages
Question 410. If you get both local and remote echoes, every character you type will appear on the screen
  1.    once
  2.    twice
  3.    three times
  4.    never
  5.    None of the above
 Discuss Question
Answer: Option B. -> twice

Latest Videos

Latest Test Papers