Sail E0 Webinar

MCQs

Total Questions : 109 | Page 4 of 11 pages
Question 31. The four arms of an AC bridge network are as follows:
Arm AB: unknown impedance
Arm BC: standard capacitor C2 of 1000pf
Arm CD: a non-inductive resistance of R of 100 Ω in parallel to a capacitor of 0.01 μF
Arm DA: a non-inductive resistance of 1000 Ω
The supply frequency is 50 Hz and connected across terminals B and D. If the bridge is balanced with the above value, determine the value of unknown Capacitance.
  1.    100 pf
  2.    1000 pf
  3.    500 pf
  4.    10 pf
 Discuss Question
Answer: Option A. -> 100 pf
Answer: (a).100 pf
Question 32. In Maxwell’s Bridge, as shown in the figure below, the values of the resistance R₁ and inductance L₁ of a coil are to be calculated after the bridge is balanced. The values are?In Maxwell’s Bridge, As Shown In The Figure Below, The Val...
  1.    375 Ω and 75 mH
  2.    75 Ω and 150 mH
  3.    37.5 Ω and 75 mH
  4.    75 Ω and 75 mH
 Discuss Question
Answer: Option A. -> 375 Ω and 75 mH
Answer: (a).375 Ω and 75 mH
Question 33. In the Owen’s bridge shown in below figure, Z₁ = 200∠60°, Z₂ = 400∠-90°, Z₃ = 300∠0°, Z₄ = 400∠30°. Then the _______In The Owen’s Bridge Shown In Below Figure, Z₁ = 200∠6...
  1.    Bridge is balanced with given impedance values
  2.    Bridge can be balanced, if Z₄ = 600∠60°
  3.    Bridge can be balanced, if Z₃ = 400∠0°
  4.    Bridge cannot be balanced with the given configuration
 Discuss Question
Answer: Option D. -> Bridge cannot be balanced with the given configuration
Answer: (d).Bridge cannot be balanced with the given configuration
Question 34. The Bridge shown in the below figure is ______________The Bridge Shown In The Below Figure Is ______________
  1.    Maxwell’s Bridge
  2.    Wien’s Bridge
  3.    Anderson’s Bridge
  4.    Hay’s Bridge
 Discuss Question
Answer: Option A. -> Maxwell’s Bridge
Answer: (a).Maxwell’s Bridge
Question 35. At high frequencies in an AC bridge, the source is _______
  1.    tuned amplifiers
  2.    oscillators
  3.    vibration galvanometer
  4.    high voltage source
 Discuss Question
Answer: Option B. -> oscillators
Answer: (b).oscillators
Question 36. The frequency range of a typical oscillator is _______
  1.    1 Hz to 50 Hz
  2.    1 kHz to 100 KHz
  3.    40 Hz to 125 kHz
  4.    1 MHz to 150 MHz
 Discuss Question
Answer: Option C. -> 40 Hz to 125 kHz
Answer: (c).40 Hz to 125 kHz
Question 37. The power output for a typical oscillator is _______
  1.    1 kW
  2.    1 MW
  3.    1 mW
  4.    7 W
 Discuss Question
Answer: Option D. -> 7 W
Answer: (d).7 W
Question 38. The output frequency of an oscillator is _______
  1.    unstable and fixed
  2.    stable and adjustable
  3.    stable and fixed
  4.    unstable and variable
 Discuss Question
Answer: Option B. -> stable and adjustable
Answer: (b).stable and adjustable
Question 39. The output waveform in an oscillator is _______
  1.    sinusoidal
  2.    cosinusoidal
  3.    tangential
  4.    logarithmic
 Discuss Question
Answer: Option A. -> sinusoidal
Answer: (a).sinusoidal
Question 40. Bridge must be balanced for ________
  1.    magnitude
  2.    angle
  3.    magnitude and angle
  4.    power
 Discuss Question
Answer: Option C. -> magnitude and angle
Answer: (c).magnitude and angle

Latest Videos

Latest Test Papers