Eigrp And Ospf(Computer Aptitude > Networking ) Questions and answers for exam Preparation

Computer Aptitude > Networking

EIGRP AND OSPF MCQs

Total Questions : 41 | Page 4 of 5 pages

Question 31. . Which two of the following commands will place network 10.2.3.0/24 into area 0?
1. router eigrp 10
2. router ospf 10
3. network 10.0.0.0
4. network 10.2.3.0 0.0.0.255 area0
5. network 10.2.3.0 0.0.0.255 area 0

1 and 4
2, 4, and 5
2 and 5
3 and 4

Discuss Question

Answer: Option C. -> 2 and 5

Question 32. . Which of the following are true regarding OSPF areas?
1. You must have separate loopback interfaces configured in each area.
2. The numbers you can assign an area go up to 65,535.
3. The backbone area is also called area 0.
4. If your design is hierarchical, then you don't need multiple areas.
5. All areas must connect to area 0.

1 only
1 and 2 only
3 and 4 only
3, 4 and 5

Discuss Question

Answer: Option D. -> 3, 4 and 5

Question 33. . Which of the following protocols support VLSM, summarization, and discontiguous networking?
1. RIPv1
2. IGRP
3. EIGRP
4. OSPF
5. BGP
6. RIPv2

1 and 4
2 and 5
3, 4 and 6
All of the above

Discuss Question

Answer: Option C. -> 3, 4 and 6

Question 34. .
Which type of OSPF network will elect a backup designated router?
1. Broadcast multi-access
2. Non-broadcast multi-access
3. Point-to-point
4. Broadcast multipoint

1 and 2
3 and 4
3 only
None of the above

Discuss Question

Answer: Option A. -> 1 and 2

Question 35. . You get a call from a network administrator who tells you that he typed the following into his router:
Router(config)#router ospf 1
Router(config-router)#network 10.0.0.0 255.0.0.0 area 0
He tells you he still can't see any routes in the routing table. What configuration error did the administrator make?

The wildcard mask is incorrect.
The OSPF area is wrong.
The OSPF Process ID is incorrect.
The AS configuration is wrong.

Discuss Question

Answer: Option A. -> The wildcard mask is incorrect.

Question 36. . Which of the following network types have a designated router and a backup designated router assigned?
1. Broadcast
2. Point-to-point
3. NBMA
4. NBMA point-to-point

1, 2 and 3
1 and 3
3 and 4
All of the above

Discuss Question

Answer: Option B. -> 1 and 3

Question 37. . You need the IP address of the devices with which the router has established an adjacency. Also, the retransmit interval and the queue counts for the adjacent routers need to be checked. What command will display the required information?

show ip eigrp adjacency
show ip eigrp topology
show ip eigrp interfaces
show ip eigrp neighbors

Discuss Question

Answer: Option D. -> show ip eigrp neighbors

Question 38. . You get a call from a network administrator who tells you that he typed the following into his router:
Router(config)#router ospf 1
Router(config-router)#network 10.0.0.0 255.0.0.0 area 0
He tells you he still can't see any routes in the routing table. What configuration error did the administrator make?

The wildcard mask is incorrect.
The OSPF area is wrong.
The OSPF Process ID is incorrect.
The AS configuration is wrong.

Discuss Question

Answer: Option A. -> The wildcard mask is incorrect.

Question 39. . Which of the following network types have a designated router and a backup designated router assigned?
1. Broadcast
2. Point-to-point
3. NBMA
4. NBMA point-to-point

1, 2 and 3
1 and 3
3 and 4
All of the above

Discuss Question

Answer: Option B. -> 1 and 3

Question 40. .
Which type of OSPF network will elect a backup designated router?
1. Broadcast multi-access
2. Non-broadcast multi-access
3. Point-to-point
4. Broadcast multipoint