Sail E0 Webinar

MCQs

Total Questions : 53 | Page 3 of 6 pages
Question 21. Final dryer has 2 modules where temperature is
  1.    45 degree and 65 degrees
  2.    45 degree and 85 degrees
  3.    65 degree and 85 degrees
  4.    45 degree and 165 degrees
 Discuss Question
Answer: Option A. -> 45 degree and 65 degrees
Answer: (a).45 degree and 65 degrees
Question 22. Pneumatic device slightly blends the
  1.    wet fibers
  2.    dry fibers
  3.    twisted fibers
  4.    short fibers
 Discuss Question
Answer: Option A. -> wet fibers
Answer: (a).wet fibers
Question 23. Dryer must only eliminate the
  1.    water in material
  2.    water vapors
  3.    residual water
  4.    all of above
 Discuss Question
Answer: Option C. -> residual water
Answer: (c).residual water
Question 24. Air fed to dryer is brought in from outside through
  1.    material entry door
  2.    delivery door
  3.    material entry and delivery door
  4.    material entry and exit door
 Discuss Question
Answer: Option C. -> material entry and delivery door
Answer: (c).material entry and delivery door
Question 25. A controller can be added to moisture meter for checking parameters
  1.    affecting the process
  2.    affecting the material
  3.    affecting the moisture control
  4.    affecting the electrical capacity
 Discuss Question
Answer: Option A. -> affecting the process
Answer: (a).affecting the process
Question 26. To allow easy passage of lump on conveyor belt, air speed
  1.    can be increased
  2.    can be lowered
  3.    cannot be adjusted
  4.    can be adjusted
 Discuss Question
Answer: Option D. -> can be adjusted
Answer: (d).can be adjusted
Question 27. Electrical capacity and resistance fluctuation is affected by
  1.    cleanliness
  2.    presence of soluble salts
  3.    cleanliness and soluble salts
  4.    water content
 Discuss Question
Answer: Option C. -> cleanliness and soluble salts
Answer: (c).cleanliness and soluble salts
Question 28. If pressure force of squeezer cylinder is increased, quantity of water to be evaporated is
  1.    minimized
  2.    increased
  3.    remains same
  4.    varies accordingly
 Discuss Question
Answer: Option A. -> minimized
Answer: (a).minimized
Question 29. During squeezing, if water is hot then quantity of water evaporated is
  1.    less
  2.    more
  3.    same
  4.    varies according to the material
 Discuss Question
Answer: Option B. -> more
Answer: (b).more
Question 30. In three-module dryer, temperature in three different zones can be
  1.    80, 190, 70 degrees respectively
  2.    90, 120, 70 degrees respectively
  3.    80, 120, 70 degrees respectively
  4.    80, 120, 90 degrees respectively
 Discuss Question
Answer: Option C. -> 80, 120, 70 degrees respectively
Answer: (c).80, 120, 70 degrees respectively

Latest Videos
Chapter 1 - GLOBAL STEEL SCENARIO & INDIAN STEEL INDUSTRY Part 1 : (13-04-2024) INDUSTRY AND COMPANY AWARENESS (ICA)
Direction Sense Test Part 1 Reasoning (Hindi)
Chapter 1 - RMHP / OHP / OB & BP Part 1 : (14-02-2024) GPOE
Cube & Cuboid Part 1 Reasoning (Hindi)
Data Interpretation (DI) Basic Concept Reasoning (Hindi)
Counting Figures Part 1 Counting Of Straight Lines Reasoning (Hindi)
Sail E0 free webinar Webinars
Real Numbers Part 7 Class 10 Maths
Real Numbers Part 1 Class 10 Maths
Polynomials Part 1 Class 10 Maths

Latest Test Papers

Pie Chart - Test Paper 1 Data Interpretation Reasoning & DI
Tabulation - Test Paper 2 Data Interpretation Reasoning & DI
Test Paper 1 Direction Sense Test Reasoning & DI
ICA , RDIC,GFM Free Modal Test Paper - Non - Technical Branch Old Syllabus 2022 - SAIL Junior Officer E0
GFM Combined 1 Free Revision Test SAIL JO E-0