Pick out the correct statement.

Question

Options:

A . Plastic chips are called non-cohesive solids

B . Kick's crushing law is, P/m = K . ln #####

C . Communition is a generic term for size enlargement operation

D . Energy required in kwh per ton of product, such that 80% of it passes through a 200 mesh screen, is called 'Work index'

Answer: Option B

Submit Your Solution Below and Earn Points !

Next Question

More Questions on This Topic :

Question 1. During filtration operation, the filtrate encounters the resistance of the....

Question 2. Optimum ratio of operating speed to critical speed of a trommel is....

Question 3. Which of the following crushers can be considered as a combination of a jaw crusher and a roller crusher?....

Question 4. Energy requirement (per unit mass of material crushed/ground) is highest for....

Question 5. Trommels are revolving screens which normally operate in the range of __________ rpm.....

Question 6. At low Reynold's number, the power (P) required for agitating a fluid in a stirred tank becomes independent of inertial ....the impeller rotational speed, and D is the impeller diameter.

Question 7. The constants (Kb, Kr and Kk) used in the laws of crushing (i.e., Bond's law, Rittinger's law and Kick's law) depend upo....Bond's law, Rittinger's law and Kick's law) depend upon the

Question 8. Separation of a suspension or slurry into a supernatant clear liquid (free from particles) and a thick sludge containing....thick sludge containing a high concentration of solid is called

Question 9. Which of the following parts of a jaw crusher is subjected to maximum wear and tear during its operation?....

Question 10. Which of the following mechanical conveyors does not come under the division 'carriers'?....

Chapter 1 - GLOBAL STEEL SCENARIO & INDIAN STEEL INDUSTRY Part 1 : (13-04-2024) INDUSTRY AND COMPANY AWARENESS (ICA)

Direction Sense Test Part 1 Reasoning (Hindi)

Chapter 1 - RMHP / OHP / OB & BP Part 1 : (14-02-2024) GPOE

Cube & Cuboid Part 1 Reasoning (Hindi)

Data Interpretation (DI) Basic Concept Reasoning (Hindi)

Counting Figures Part 1 Counting Of Straight Lines Reasoning (Hindi)

Sail E0 free webinar Webinars

Real Numbers Part 7 Class 10 Maths

Real Numbers Part 1 Class 10 Maths

Polynomials Part 1 Class 10 Maths

Pie Chart - Test Paper 1 Data Interpretation Reasoning & DI

Tabulation - Test Paper 2 Data Interpretation Reasoning & DI

Test Paper 1 Direction Sense Test Reasoning & DI

ICA , RDIC,GFM Free Modal Test Paper - Non - Technical Branch Old Syllabus 2022 - SAIL Junior Officer E0

GFM Combined 1 Free Revision Test SAIL JO E-0