In grinding irregular, curved, tapered, convex and concave surfaces, the grinder used is Options: A . &nbspCylindrical grinder B . &nbspInternal grinder C . &nbspSurface grinder D . &nbspTool and cutter grinder

In grinding irregular, curved, tapered, convex and concave surfaces, the grinder

Question

In grinding irregular, curved, tapered, convex and concave surfaces, the grinder used is

Options:

A . Cylindrical grinder

B . Internal grinder

C . Surface grinder

D . Tool and cutter grinder

Answer: Option C

Submit Your Solution Below and Earn Points !

Next Question

Question 1. In a shaper, the length of stroke is increased by....

Question 2. The crystal structure of austenite is....

Question 3. Slow speed of the spindle is necessary in....

Question 4. Two 1 mm thick steel sheets are to be spot welded at a current of 5000 A. Assuming effective resistance to be 200 μm an....of 0.2 second, heat generated during the process will be

Question 5. The correct sequence of the following parameters in order of their maximum to minimum influence on tool life is....

Question 6. In order to have interference fit, it is essential that the lower limit of the shaft should be....

Question 7. The common welding error that occurs due to wrong speed, faulty preparation, and high / low current, improper electrode ....and high / low current, improper electrode size is called?

Question 8. The angle on which the strength of the tool depends is....

Question 9. It is required to cut screw threads of 2 mm pitch on a lathe. The lead screw has a pitch of 6 mm. If the spindle speed i....60 r.p.m., then the speed of lead screw will be

Question 10. The tool made of cemented carbide wear out faster at....

Chapter 1 - GLOBAL STEEL SCENARIO & INDIAN STEEL INDUSTRY Part 1 : (13-04-2024) INDUSTRY AND COMPANY AWARENESS (ICA)

Direction Sense Test Part 1 Reasoning (Hindi)

Chapter 1 - RMHP / OHP / OB & BP Part 1 : (14-02-2024) GPOE

Cube & Cuboid Part 1 Reasoning (Hindi)

Data Interpretation (DI) Basic Concept Reasoning (Hindi)

Counting Figures Part 1 Counting Of Straight Lines Reasoning (Hindi)

Sail E0 free webinar Webinars

Real Numbers Part 7 Class 10 Maths

Real Numbers Part 1 Class 10 Maths

Polynomials Part 1 Class 10 Maths

Pie Chart - Test Paper 1 Data Interpretation Reasoning & DI

Tabulation - Test Paper 2 Data Interpretation Reasoning & DI

Test Paper 1 Direction Sense Test Reasoning & DI

ICA , RDIC,GFM Free Modal Test Paper - Non - Technical Branch Old Syllabus 2022 - SAIL Junior Officer E0

GFM Combined 1 Free Revision Test SAIL JO E-0