MCQs
Total Questions : 885
| Page 80 of 89 pages
Answer: Option B. -> 172.16.18.255 255.255.252.0
Answer: Option D. -> 127.0.0.1
Answer: Option B. -> 172.16.45.12
Answer: Option B. -> 192.168.10.142
Question 795. Using the illustration from the previous question, what would be the IP address of SO if you were using the first subnet? The network ID is 192.168.10.0/28 and you need to use the last available IP address in the range. Again, the zero subnet should not be considered valid for this question.
Answer: Option B. -> 192.168.10.30
Answer: Option C. -> 200.10.5.64
Answer: Option A. -> Router (config) #ip subnet-zero
Question 798. What information is displayed by the show hosts command?1. Temporary DNS entries2. The names of the routers created using the hostname command3. The IP addresses of workstations allowed to access the router4. Permanent name-to-address mappings created using the ip host command5. The length of time a host has been connected to the router via Telnet
Answer: Option B. -> 1 and 4
Question 799. You have your laptop directly connected into a router's Ethernet port. Which of the following are among the requirements for the copy flash tftp command to be successful?1. TFTP server software must be running on the router.2. TFTP server software must be running on your laptop.3. The Ethernet cable connecting the laptop directly into the router's Ethernet port must be a straight-through cable.4. The laptop must be on the same subnet as the router's Ethernet interface.5. The copy flash tftp command must be supplied the IP address of the laptop.
Answer: Option B. -> 2, 4 and 5
Answer: Option B. -> copy flash tftp