If the cutting speed is increased, then the built-up-edge Options: A . &nbspBecomes longer B . &nbspMay or may not form C . &nbspBecomes smaller and finally does not form at all D . &nbspHas nothing to do with speed

If the cutting speed is increased, then the built-up-edge

Question

If the cutting speed is increased, then the built-up-edge

Options:

A . Becomes longer

B . May or may not form

C . Becomes smaller and finally does not form at all

D . Has nothing to do with speed

Answer: Option C

Submit Your Solution Below and Earn Points !

Next Question

Question 1. For softer materials, the point angle of the drill is kept....

Question 2. For harder alloy steel, the point angle of the drill is kept....

Question 3. The lathe spindles at the nose end have....

Question 4. The broaching operation in which either the work or the tool moves across the other, is known as....

Question 5. A hole is of dimension φ = 9 ₊0⁺⁰∙⁰¹⁵ mm. The corresponding shaft is of dimension φ = 9 ₊0.001⁺⁰∙....dimension φ = 9 ₊0.001⁺⁰∙⁰¹⁰ mm. The resulting assembly has

Question 6. In an orthogonal cutting, the depth of cut is halved and the feed rate is double. If the chip thickness ratio is unaffec....the changed cutting conditions, the actual chip thickness will be

Question 7. Chemical milling operation is performed....

Question 8. What is the method of brazing used to join relatively small assemblies made from materials that either do not oxidize at....temperature or can be protected from oxidation with a flux?

Question 9. Hardness of steel greatly improves with....

Question 10. Side relief angle of a single point tool is the angle....

Chapter 1 - GLOBAL STEEL SCENARIO & INDIAN STEEL INDUSTRY Part 1 : (13-04-2024) INDUSTRY AND COMPANY AWARENESS (ICA)

Direction Sense Test Part 1 Reasoning (Hindi)

Chapter 1 - RMHP / OHP / OB & BP Part 1 : (14-02-2024) GPOE

Cube & Cuboid Part 1 Reasoning (Hindi)

Data Interpretation (DI) Basic Concept Reasoning (Hindi)

Counting Figures Part 1 Counting Of Straight Lines Reasoning (Hindi)

Sail E0 free webinar Webinars

Real Numbers Part 7 Class 10 Maths

Real Numbers Part 1 Class 10 Maths

Polynomials Part 1 Class 10 Maths

Pie Chart - Test Paper 1 Data Interpretation Reasoning & DI

Tabulation - Test Paper 2 Data Interpretation Reasoning & DI

Test Paper 1 Direction Sense Test Reasoning & DI

ICA , RDIC,GFM Free Modal Test Paper - Non - Technical Branch Old Syllabus 2022 - SAIL Junior Officer E0

GFM Combined 1 Free Revision Test SAIL JO E-0