Question
A bucket wheel excavator with 20 buckets of capacity 0.5 m3 each, rotates at 5 rev/min. The bucket
fill factor is 80%. The excavator loads on to 1200 mm wide belt conveyor. The cross-section area
(m2) of the material on the belt is 0.1B2, where B is the belt width in m. The minimum speed of the
belt in m/s to avoid spillage of material is
fill factor is 80%. The excavator loads on to 1200 mm wide belt conveyor. The cross-section area
(m2) of the material on the belt is 0.1B2, where B is the belt width in m. The minimum speed of the
belt in m/s to avoid spillage of material is
Answer: Option C
Was this answer helpful ?
-NA-
Was this answer helpful ?
Submit Solution