A jam nut is a locking device in which

Sail E0 Webinar

Question

A jam nut is a locking device in which

Options:

A . a thinner nut is tightened down over a thicker or main nut and the main nut is tightened against the thinner nut by loosening

B . a slot is cut in line with the centre of each face and a split pin passes through two slots in the nut and a hole in the bolt, so that a positive lock is obtained unless the pin shears

C . a slot is cut about half way through the nut and a small screw is tightened between the nut and the bolt in order to produce more friction

D . the bottom cylindrical portion is recessed to receive the tip of the locking set screw

Answer: Option A
Answer: (a).a thinner nut is tightened down over a thicker or main nut and the main nut is tightened against the thinner nut by loosening

Was this answer helpful ?

Next Question

Submit Solution

More Questions on This Topic :

Question 1. A locking device extensively used in automobile industry is a....

Question 2. A key way lowers....

Question 3. A tapered key which fits in a key way in the hub and is flat on the shaft, is known as....

Question 4. The included angle for the V-belt is usually....

Question 5. In static loading, stress concentration is more serious in....

Question 6. In a boundary lubricated bearing, there is a __________ of lubricant between the journal and the bearing.....

Question 7. If the helix angle of a helical gear is increased, the load carrying capacity of the tooth increases.....

Question 8. When the top of a tooth undercuts the root on the mating gear, it is known as interference.....

Question 9. The design of the pressure vessel is based on....

Question 10. A spring is used to....

Chapter 1 - GLOBAL STEEL SCENARIO & INDIAN STEEL INDUSTRY Part 1 : (13-04-2024) INDUSTRY AND COMPANY AWARENESS (ICA)

Direction Sense Test Part 1 Reasoning (Hindi)

Chapter 1 - RMHP / OHP / OB & BP Part 1 : (14-02-2024) GPOE

Cube & Cuboid Part 1 Reasoning (Hindi)

Data Interpretation (DI) Basic Concept Reasoning (Hindi)

Counting Figures Part 1 Counting Of Straight Lines Reasoning (Hindi)

Sail E0 free webinar Webinars

Real Numbers Part 7 Class 10 Maths

Real Numbers Part 1 Class 10 Maths

Polynomials Part 1 Class 10 Maths

Chapter 3.1 : Overview of Finance & Accounts Department Chapter 3 : Finance & Accounts SAIL E0 - GFM 2024

Chapter 2.1 : Overview Chapter 2 : Materials Management SAIL E0 - GFM 2024

Chapter 1.1 : Personnel Functions- An overview Chapter 1 : Personnel Management SAIL E0 - GFM 2024

GPOE / GPA Combined 1 Free CBT Mock Test SAIL E0 2024

CBT Mixed Test 1 GPOE/GPA SAIL E0 2024