Sail E0 Webinar

MCQs

Total Questions : 73 | Page 1 of 8 pages
Question 1. How do you configure a printing pool?
  1.    Associate one physical print gear port with multiple printers
  2.    Associate multiple print devices with multiple printers
  3.    None of these
  4.    Associate multiple print devices with one printer
  5.    Associate one print device with multiple printers
 Discuss Question
Answer: Option D. -> Associate multiple print devices with one printer
Question 2. You want to connect 2 networks that are both lOBaseT Ethernet networks. The 2 networks are located in separate buildings so that they are approximately 1,000 meters apart. Which media should you use?
  1.    Type 1 STP Cable
  2.    RG-58 A/U Coaxial Cable
  3.    None of these
  4.    wireless infrared
  5.    fiber-optic cable
 Discuss Question
Answer: Option E. -> fiber-optic cable
Question 3. You install Windows NT Server on a computer, making the computer a backup domain controller in an existing domain. After installation, you discover that you used the wrong domain name. What should you do?
  1.    Change the domain name by using the Emergency Repair disk
  2.    Reinstall Windows NT Server
  3.    Change the domain name by using Control Panel
  4.    None of these
  5.    Modify the domain name in the Registry
 Discuss Question
Answer: Option B. -> Reinstall Windows NT Server
Question 4. In your company, 2 Ethernet Networks are connected with a router. All network connections run TCP/IP. Your new client computer can access only the computers on your side of the router. All other computers are able to access one another. What is the most likely cause of the problem?
  1.    incorrect termination of the destination network
  2.    malfunctioning repeater
  3.    None of these
  4.    incorrect subnet mask on your client computer
  5.    defective network adapter in the router
 Discuss Question
Answer: Option D. -> incorrect subnet mask on your client computer
Question 5. In heavily overloaded networks, cross-bar switching offers better performance than cell-backplane switching
  1.    True
  2.    None of these
  3.    wireless infrared
  4.    fiber-optic cable
  5.    FALSE
 Discuss Question
Answer: Option E. -> FALSE
Question 6. What must you do to create a printer pool containing four shared printers on your Windows NT Server computer?
  1.    Specify the same printer driver and settings for all printers
  2.    Set up all printers as network-interface printer devices
  3.    None of these
  4.    Set individual printer properties for each printer
  5.    Set up all the printers to share the same parallel port
 Discuss Question
Answer: Option A. -> Specify the same printer driver and settings for all printers
Question 7. From your client computer, you are able to access several servers on your 10Base2 Ethernet network. However, you are NOT able to access a server names RED. Other client computers are able to access RED. What is the most likely cause of the problem?
  1.    An excessive number of collisions are occurring on the media
  2.    There is a break in the cable
  3.    There is an incorrect IRQ setting on the network adapter in your client computer
  4.    None of these
  5.    There is a protocol mismatch between your client computer and RED.
 Discuss Question
Answer: Option E. -> There is a protocol mismatch between your client computer and RED.
Question 8. Windows Naming Service (WINS)
  1.    runs on Windows NT W/S
  2.    dynamically allocates IP addresses to client computers
  3.    resolves computer names to IP addresses
  4.    None of these
  5.    Increases broadcast traffic
 Discuss Question
Answer: Option C. -> resolves computer names to IP addresses
Question 9. Most routers can also act as bridges
  1.    True
  2.    None of these
  3.    Increases broadcast traffic
  4.    resolves computer names to IP addresses
  5.    FALSE
 Discuss Question
Answer: Option A. -> True
Question 10. Assume, you are the administrator of the TUNA domain. You need to allow Lisa from the BASS domain to administrate the TUNA domain while you are on vacation. A one-way trust relationship has been set up so that TUNA trusts BASS. Which group assignments would accomplish your needs?
  1.    Create a local group in BASS called Loc-Admins that contains the Lisa user account. Create a global group in TUNA called Tuna-Admins that contains the BASSWLoc-Admins group. Add the Tuna-Admins group
  2.    None of these
  3.    Create a local group in TUNA called Tuna-Admins that contains the BASSWLisa user account. Add the Tuna-Admins group to the global Domain Admins group in TUNA
  4.    Create a global group in BASS called Gbl-Admins that contains the Lisa user account. Add the BASSGbl-Admins group to the local Administrators group in TUNA
  5.    Create a global group in the TUNA domain called Tuna-Admins that contains the BASSWLisa user account. Add the Tuna-Admins group to the local Administrators group in TUNA
 Discuss Question
Answer: Option D. -> Create a global group in BASS called Gbl-Admins that contains the Lisa user account. Add the BASSGbl-Admins group to the local Administrators group in TUNA

Latest Videos

Latest Test Papers