Sail E0 Webinar

MCQs

Total Questions : 540 | Page 50 of 54 pages
Question 491. In some circumstances an entire drawing can be inserted into a different drawing as a block. When this is used the base point will default to _________.
  1.    10, 10
  2.    30, 30
  3.    20, 20
  4.    0, 0
 Discuss Question
Answer: Option D. -> 0, 0
Question 492. In architectural drawing ________ are often used to illustrate and detail structural components.
  1.    Building sections
  2.    All of these
  3.    Foundation beam detail sections
  4.    Wall sections
 Discuss Question
Answer: Option B. -> All of these
Question 493. These are joined together in the field to build a structure:
  1.    Main members
  2.    Riveted members
  3.    Assembled fabrications
  4.    Steel fabrications
 Discuss Question
Answer: Option A. -> Main members
Question 494. This is the range of digital or hard copy documents that specify the physical function requirements for a product:
  1.    Drawing definition
  2.    Engineering design
  3.    Product design
  4.    Product definition
 Discuss Question
Answer: Option D. -> Product definition
Question 495. An advantage of this type of view is that each view shows the object all the way through as if it were transparent:
  1.    Auxiliary
  2.    Orthographic
  3.    Horizontal
  4.    Planar
 Discuss Question
Answer: Option B. -> Orthographic
Question 496. By using a ________ section of a cylindrical mechanical part the drafter should be able to show only one view of the part.
  1.    Whole
  2.    Broken out
  3.    Revolved
  4.    Half
 Discuss Question
Answer: Option C. -> Revolved
Question 497. This is a curve showing the displacement of the follower as ordinates on a base line that represents one revolution of the cam:
  1.    Displacement diagram
  2.    Cam cycle
  3.    Follower
  4.    Reciprocation chart
 Discuss Question
Answer: Option A. -> Displacement diagram
Question 498. When dimensioning piping drawings, you give the lengths of all runs of this type:
  1.    Straight
  2.    Angular
  3.    Filleted
  4.    Transverse
 Discuss Question
Answer: Option A. -> Straight
Question 499. The principle reason for using an auxiliary view is ________.
  1.    To locate center marks
  2.    To show cylinders as ellipses
  3.    To create a true projection plane from an inclined plane in one of the primary views
  4.    To eliminate hidden lines
 Discuss Question
Answer: Option C. -> To create a true projection plane from an inclined plane in one of the primary views
Question 500. Baseline dimensions are referenced from a common geometric feature known as a ________.
  1.    Point of reference
  2.    Corner
  3.    Datum
  4.    Edge
 Discuss Question
Answer: Option C. -> Datum

Latest Videos

Latest Test Papers