Engineering Drawing Mcqs Questions MCQs

  1. Topics
  2. Mechanical Engineering
  3. Engineering Drawing Mcqs

engineering drawing mcqs Questions

Total Questions : 1020

Page 1 of 51 pages
Question 1. Technical drawings typically serve one of three purposes:
  1.     Visualization, Communication, or Documentation
  2.     Visualization, Dimensioning, or Documentation
  3.     Communication, Documentation, or Installation
  4.     Documentation, Installation, or Engineering
Answer: Option A
Question 2. An advantage of this type of view is that each view shows the object all the way through as if it were transparent:
  1.     Planar
  2.     Horizontal
  3.     Auxiliary
  4.     Orthographic
Answer: Option D
Question 3. These maps are used to plan construction projects that locate construction features so they fit the topography of the area:
  1.     Subdivision plats
  2.     Landscape maps
  3.     Structural topography maps
  4.     Structure location plans
Answer: Option D
Question 4. In oblique sketches, the most commonly used angles for receding lines are:
  1.     15 or 30 degrees
  2.     25 or 30 degrees
  3.     30 or 45 degrees
  4.     45 or 60 degrees
Answer: Option C
Question 5. Lines of an isometric drawing that are not parallel to the isometric axes are called this:
  1.     Trimetric lines
  2.     Non-isometric lines
  3.     Multiview lines
  4.     Dimetric lines
Answer: Option B
Question 6. These gears transmit power between shafts whose axes intersect at any angle:
  1.     Worm gears
  2.     Spur gears
  3.     Bevel gears
  4.     Racks
Answer: Option C
Question 7. This means that a feature of a finished product contains the maximum amount of material permitted by the tolerance dimensions for that feature:
  1.     Maximum material condition
  2.     Machined material condition
  3.     Maximum machined indication
  4.     Machine mark indication
Answer: Option A
Question 8. A secondary auxiliary view is a projection off of the __________.
  1.     Front view
  2.     Top view
  3.     Primary auxiliary view
  4.     None of the above
Answer: Option C
Question 9. This should show what changes were made, when, and by whom:
  1.     Portable document
  2.     Record of revisions
  3.     Title form
  4.     Revision drawings
Answer: Option B
Question 10. A half-moon protractor is divided into how many degrees?
  1.     360
  2.     180
  3.     270
  4.     310
Answer: Option B
Question 11. This is the plane upon which the top view is projected:
  1.     Horizontal
  2.     Frontal
  3.     Profile
  4.     Base
Answer: Option A
Question 12. Angles project true size only when the plane containing the angle and plane of projection are this:
  1.     Adjacent
  2.     Aligned
  3.     Perpendicular
  4.     Parallel
Answer: Option D
Question 13. In order to set drawing limits for a 'c' size architectural drawing the drafter should set the limits to ________.
  1.     0, 0 and 2, 9
  2.     0, 0 and 17, 11
  3.     0, 0 and 18, 24
  4.     0, 0 and 34, 24
Answer: Option C
Question 14. Elevation drawings will include information about ________.
  1.     Roof pitch
  2.     Siding
  3.     Window style
  4.     All of the above
Answer: Option D
Question 15. In order to create one solid model from two or more separate solid shapes the drafter will need to position them and then ________.
  1.     Use Union to join them
  2.     Use the Join command
  3.     Use the Add Parts tool
  4.     None of the above
Answer: Option A
Question 16. When setting up a mechanical drawing in auto-cad the drafter should set the units to ________.
  1.     Fractional
  2.     Decimal
  3.     Architectural
  4.     Metric
Answer: Option B
Question 17. The text used on a typical detail sheet should be ________.
  1.     Placed horizontally
  2.     In bold text
  3.     In an architectural text style
  4.     None of the above
Answer: Option A
Question 18. This is a conical-shaped recess around a hole, often used to receive a tapered screw head:
  1.     Boss
  2.     Spot-face
  3.     Counter-bore
  4.     Countersink
Answer: Option D
Question 19. This is used in applications for nonferrous construction:
  1.     Copper tubing
  2.     Steel pipe
  3.     PVC pipe
  4.     Iron tubing
Answer: Option A
Question 20. These items typically are not used in new designs, but are still common in high-power amplifiers:
  1.     Amplifier tubes
  2.     Electron tubes
  3.     Signal relays
  4.     Switches
Answer: Option B

Related Topics

Automobile EngineeringAutomobile Engineering McqsCompressors Gas Turbines And Jet EnginesCompressors Gas Turbines And Jet Engines McqsEngineering DrawingEngineering Drawing McqsEngineering MaterialsEngineering Materials McqsEngineering Mechanics McqsEngineering ThermodynamicsEngineering Thermodynamics McqsHeat And Mass TransferHeat And Mass Transfer McqsHydraulics And Fluid Mechanics In MeHydraulics And Fluid Mechanics In Me McqsIndustrial Engineering And Prod N Mgmt McqsIndustrial Engineering And Production ManagementInternal Combustion Engines I C EnginesInternal Combustion Engines I C Engines McqsMachine DesignMachine Design McqsManufacturing And Production TechnologyManufacturing And Production Technology McqsPower Plant EngineeringPower Plant Engineering McqsRefrigeration And Air ConditioningRefrigeration And Air Conditioning McqsSteam Boilers Engines Nozzles And TurbinesSteam Boilers Engines Nozzles And Turbines McqsStrength Of Materials McqsTheory Of MachineTheory Of Machine McqsWorkshop TechnologyWorkshop Technology Mcqs

Recent Questions

Q. Find Out Whether There Is Any Grammatical Error In Below Sen....Q. Joule Is The Unit Of....Q. The Non-metal Found In The Liquid State Is....Q. When The Receding Lines Are True Length, And The Projectors ....Q. The Quantity Of Goods Produced And Costs Incurred By A Firm ....Q. It Is Necessary To Maintain The Valve Clearances As They....Q. The Atmospheric Air Is Held To The Earth By :....Q. What Is The Default Number Of Seconds That Cached Session Pa....Q. A Liquid Compressed In Cylinder Has A Volume Of 0.04 M3 At 5....Q. The Orthogonal Trajectories Of The Family Of Curves Anȡ....Q. Several College Interns Are Working At Your Company For The ....Q. Which Of The Following Will Be Unsuitable For Dust Cleaning ....Q. Q. Which Of The Following Is One Of The Important Mecha....Q. The Minimum Parking Brake Force Is Generally ___________ Of ....Q. Load Factor Is....Q. If 20% Of (A + B) = 50% Of B, Then Value Of $$\frac{2A - B}{....Q. Who First Published The Periodic Table?....Q. Now Tony Settles Upon A Carnot Engine. Calculate The Efficie....Q. In A Boundary Lubricated Bearing, There Is A __________ Of L....Q. A Particle Is Dropped From A Height Of 3 M On A Horizontal F....