Sail E0 Webinar

MCQs

Total Questions : 171 | Page 1 of 18 pages
Question 1. Gauge is proportional to
  1.    pressure
  2.    quantity of fiber
  3.    uniformity
  4.    relativity
 Discuss Question
Answer: Option B. -> quantity of fiber
Answer: (b).quantity of fiber
Question 2. Value of total machine draft on drawframe can vary from
  1.    3 to 6 times
  2.    6 to 9 times
  3.    9 to 12 times
  4.    12 to 15 times
 Discuss Question
Answer: Option B. -> 6 to 9 times
Answer: (b).6 to 9 times
Question 3. Type of measurement device for measuring variations in sliver mass is composed of
  1.    scanning cylinders
  2.    speed variator
  3.    digital processor
  4.    all of above
 Discuss Question
Answer: Option D. -> all of above
Answer: (d).all of above
Question 4. Right diameter in draft cylinders is important for
  1.    less vibrations
  2.    better control of fibers
  3.    less energy consumption
  4.    all of above
 Discuss Question
Answer: Option D. -> all of above
Answer: (d).all of above
Question 5. Drawing operation allows homogeneous blend of
  1.    same fibers
  2.    different fibers
  3.    thick fibers
  4.    thin fibers
 Discuss Question
Answer: Option B. -> different fibers
Answer: (b).different fibers
Question 6. Number of screws in feedrack are
  1.    12
  2.    16
  3.    21
  4.    28
 Discuss Question
Answer: Option A. -> 12
Answer: (a).12
Question 7. Maximum incoming load of rotating flanges is
  1.    100/300 g/m
  2.    200/300 g/m
  3.    250/300 g/m
  4.    200/350 g/m
 Discuss Question
Answer: Option B. -> 200/300 g/m
Answer: (b).200/300 g/m
Question 8. Combs per head in chain is calculated to be
  1.    88
  2.    93
  3.    103
  4.    18
 Discuss Question
Answer: Option A. -> 88
Answer: (a).88
Question 9. Pitch between operating combs of chain is calculated to be
  1.    8 mm
  2.    10 mm
  3.    13 mm
  4.    22 mm
 Discuss Question
Answer: Option A. -> 8 mm
Answer: (a).8 mm
Question 10. Feed ratio of rotating flanges is
  1.    200 m/min
  2.    80 m/min
  3.    130 m/min
  4.    65 m/min
 Discuss Question
Answer: Option B. -> 80 m/min
Answer: (b).80 m/min

Latest Videos
Chapter 1 - GLOBAL STEEL SCENARIO & INDIAN STEEL INDUSTRY Part 1 : (13-04-2024) INDUSTRY AND COMPANY AWARENESS (ICA)
Direction Sense Test Part 1 Reasoning (Hindi)
Chapter 1 - RMHP / OHP / OB & BP Part 1 : (14-02-2024) GPOE
Cube & Cuboid Part 1 Reasoning (Hindi)
Data Interpretation (DI) Basic Concept Reasoning (Hindi)
Counting Figures Part 1 Counting Of Straight Lines Reasoning (Hindi)
Sail E0 free webinar Webinars
Real Numbers Part 7 Class 10 Maths
Real Numbers Part 1 Class 10 Maths
Polynomials Part 1 Class 10 Maths

Latest Test Papers

Pie Chart - Test Paper 1 Data Interpretation Reasoning & DI
Tabulation - Test Paper 2 Data Interpretation Reasoning & DI
Test Paper 1 Direction Sense Test Reasoning & DI
ICA , RDIC,GFM Free Modal Test Paper - Non - Technical Branch Old Syllabus 2022 - SAIL Junior Officer E0
GFM Combined 1 Free Revision Test SAIL JO E-0