Sail E0 Webinar

MCQs

Total Questions : 86 | Page 8 of 9 pages
Question 71. Which of the following does not represent the condition of adjustment?
  1.    Adjustment of vertical axis
  2.    Adjustment of level tube
  3.    Adjustment of cross hair ring
  4.    Adjustment of line of sight
 Discuss Question
Answer: Option A. -> Adjustment of vertical axis
Answer: (a).Adjustment of vertical axis
Question 72. Which adjustment doesn’t need any levelling?
  1.    Vertical axis
  2.    Horizontal axis
  3.    Line of sight
  4.    Cross-hair
 Discuss Question
Answer: Option D. -> Cross-hair
Answer: (d).Cross-hair
Question 73. Permanent adjustments are done at every time the instrument is setup.
  1.    True
  2.    False
  3.    May be True or False
  4.    Can't say
 Discuss Question
Answer: Option B. -> False
Answer: (b).False
Question 74. Determine the inclination of line of sight if H = 2.654 m and Hꞌ = 1.876 m and the distance between the points can be given as 150 m.
  1.    0º19ꞌ
  2.    0º20ꞌ
  3.    0º17ꞌ
  4.    0º7ꞌ
 Discuss Question
Answer: Option C. -> 0º17ꞌ
Answer: (c).0º17ꞌ
Question 75. The adjustment of line of collimation is having most priority in permanent adjustments.
  1.    True
  2.    False
  3.    May be True or False
  4.    Can't say
 Discuss Question
Answer: Option A. -> True
Answer: (a).True
Question 76. Dumpy level is used for_________
  1.    Finding point to point distance
  2.    Finding the elevation difference
  3.    Finding the traverse area
  4.    Finding the perimeter of area
 Discuss Question
Answer: Option B. -> Finding the elevation difference
Answer: (b).Finding the elevation difference
Question 77. Which of the following is not a method involved in area by co-ordinate?
  1.    Sub-division into area figures
  2.    Co-ordinate method
  3.    Meridian method
  4.    D.M.D method
 Discuss Question
Answer: Option A. -> Sub-division into area figures
Answer: (a).Sub-division into area figures
Question 78. Find the meridian distance if m1 = 32.76, and D2 = 44.56 m.
  1.    71.24 m
  2.    17.24 m
  3.    17.42 m
  4.    71.42 m
 Discuss Question
Answer: Option D. -> 71.42 m
Answer: (d).71.42 m
Question 79. Find the value of M2 if D1 = 24.86 m, D2 = 17.65 m.
  1.    76.37 m
  2.    67.37 m
  3.    76.73 m
  4.    37.76 m
 Discuss Question
Answer: Option B. -> 67.37 m
Answer: (b).67.37 m
Question 80. The method of tracing is involved in which of the following procedures?
  1.    Sub-division into squares
  2.    Sub-division into area figures
  3.    D.M.D method
  4.    Division into trapezoidal figures
 Discuss Question
Answer: Option D. -> Division into trapezoidal figures
Answer: (d).Division into trapezoidal figures

Latest Videos

Latest Test Papers