Sail E0 Webinar

MCQs

Total Questions : 1197 | Page 57 of 120 pages
Question 561.

 
If the level of
tension in the belt is too high, it can result in a loss of power or in
bending of the rotating shaft or crankshaft.


  1.    Correct
  2.    Incorrect
 Discuss Question
Answer: Option A. -> Correct


Question 562.

 
The co-efficient of rolling resistance for a truck weighing 63 500 N is 0.018. The rolling resistance to the truck is


  1.    1.143 N
  2.    11.43 N
  3.    114.3 N
  4.    1143 N
 Discuss Question
Answer: Option D. -> 1143 N


Question 563.

 
If the air-fuel mixture in a spark ignition engine is too rich, then air-fuel ratio is about


  1.    17:1
  2.    15:1
  3.    13:1
  4.    10:1
 Discuss Question
Answer: Option D. -> 10:1


Question 564.


The firing order for an in-line four cylinder I.C. engine is


  1.    1-2-3-4
  2.    1-3-4-2
  3.    1-2-4-3
  4.    1-3-2-4
 Discuss Question
Answer: Option B. -> 1-3-4-2


Question 565.


In automobiles G.V.W. refers to


  1.    gross vehicle width
  2.    gross vehicle weight
  3.    gross vehicle wheel base
  4.    gross vehicle wheel track
 Discuss Question
Answer: Option B. -> gross vehicle weight


Question 566.


The effect of having excess camber is


  1.    excessive steering alignment torque
  2.    hard steering
  3.    too much traction
  4.    uneven tyre wear
 Discuss Question
Answer: Option D. -> uneven tyre wear


Question 567.

 
In a ventilated disc brake,


  1.    a duct directs air towards the caliper for cooling while the vehicle is moving
  2.    caliper is covered with cooling fins
  3.    disc contains many small holes for optimum cooling performance
  4.    disc contains radial vanes between its rubbing surfaces for optimum cooling performance
 Discuss Question
Answer: Option D. -> disc contains radial vanes between its rubbing surfaces for optimum cooling performance


Question 568.


Positive camber is used to compensate for wheels tilting inward due to the weight of the vehicle.


  1.    Yes
  2.    No
 Discuss Question
Answer: Option A. -> Yes


Question 569.


In a spark plug,
when the temperature of the central electrode exceeds a certain
temperature, any carbon that has adhered will be burnt off, and the
temperature at which this burning off carbon starts is referred to as
the self cleaning temperature.


  1.    Correct
  2.    Incorrect
 Discuss Question
Answer: Option A. -> Correct


Question 570.

The main function of intake manifold is that it


  1.    promotes the mixture of air and fuel
  2.    reduces intake noise
  3.    cools the intake air to a suitable temperature
  4.    distributes intake air equally to the cylinders
 Discuss Question
Answer: Option D. -> distributes intake air equally to the cylinders


Latest Videos

Latest Test Papers